SageTV Client v6.4-RECOiL
I just posted the server of this program. Heres the client again its from RECOiL.
TV how you want
Pause live TV when the phone rings or your microwave pizza is done. Pause, skip forward or back to your favorite parts of recorded shows. Live TV just doesnt have the appeal it used to have when you can use SageTV to watch your shows the way you want to.
Comments(17)
It looks like a good program to me. Thx
About time someone put one of these, i’d like to see more!!
Thanks for this. This is one of the better TV clients that are out there
Will this let me watch Battlestar Galactica and stuff or just crappy tv rips?
So how exactly will this work? Do I need to have my cable plugged into my computer or will this just stream live tv from the internet? I mean, I’m usually not such a noob but have no idea about this software. Seems like Tivo for computers but how do you legally get access to all those shows…hmmm. Do you have to pay or is it free?
http://rapidshare.com/files/151905420/sagetv.client.v6.4-recoil.rar
http://rapidshare.com/files/151902413/SageTV.Client.v6.4-RECOiL.rar
i already have somethin to record tv .. .but looking for a client that will read from a directory and provide interface for viewing xvids. good for that?
Found my answer on wikipedia. Needs hardware. Ghey
Yeah, needs hardware…downloaded and installed, and re-installed my old TV Tuner but apparently it’s not compatible with this program
Might have to buy a new card though because the program actually looks pretty nice. And possibly a new external hard drive to store recordings because I remember they could get pretty big when I was using my old card before. Something like a couple gigs for a 30-minute show, though this program might be able to compress better, or a different card. Never really liked mine anyway. It was just a cheap $20 card I bought probably 2 years ago that I used for a while but never reinstalled when I got a new hard drive and re-installed windows.
sage
Boys,
Just ask your mommies and daddies to forward your next allowance to upgrade your POS computers.
Also, upgrade to Vista Ultimate and you get this type of software built in with lots of addons available…
utterly sh!t post from Kennii
Not even a basic amount of info to enable ppl to decide whether to download or not.
Here I will do your job for you Kennii
System Requirements Overview
Microsoft Windows 98SE, 2000 SP3 or higher, ME, XP, Vista, Mac OS X or Linux
128MB RAM, recommended 256MB RAM
Intel Pentium III 600 MHz or AMD Athlon 600 MHz with additional requirements including TV Tuner Card, Video Card and additional software.
Full Details
The following products and system details are required to effectively deploy SageTV. If you do not have them or have questions regarding the requirements, either contact us or take this list to your local computer retailer for assistance. If you need a compatible TV Tuner card, we offer SageTV bundled with a few different PCI Tuner cards and USB devices through our Online Store.
For SageTV Media Center for Windows – PC Operating System: Microsoft Windows 98SE, 2000 SP3 or higher, ME, XP (Home, Pro or MCE), or Vista
Minimum 128Mb RAM and a Recommended 256Mb RAM
For Hardware Encoding: Intel Pentium III, Celeron or AMD Athlon at 600 MHz or VIA 800MHz or faster
For Software Encoding: Intel Pentium 4, Celeron or AMD Athlon 1.5 Ghz and above
For Placeshifting Server: Intel Pentium 4, Celeron or AMD Athlon 1.5 Ghz and above
For SageTV Media Center for Mac – Mac OS 10.4 or later. Mac computers with PowerPC G4 (500Mhz or faster), G5 or Intel processors. Minimum system requirements are 256MB RAM, recommended 512MB RAM
For SageTV Placeshifter for Windows or Linux: high speed internet connection (128kbps for TV playback) and Intel Pentium III, Celeron or AMD Athlon at 600 MHz or VIA 800MHz or faster
For SageTV Placeshifter for Mac: high speed internet connection (128kbps for TV playback) and Mac with 128MB RAM, PowerPC G4 (500 Mhz or faster), G5 or Intel processor running Mac OS X version 10.4 or later
For HDTV Playback: 3Ghz processor or higher or a slower processor in combination with a video card utilizing DXVA support and using a decoder which supports DXVA
Supported Analog TV Tuners with Hardware Encoding:
Mac
Hauppauge EskapeLabs myTV.PVR
Hauppauge WinTV PVR USB2 (use the EskapeLabs drivers)
Windows
Adaptec VideOh! DVD Media Center Edition (PCI only)
ATI eHome Wonder
ATI Theater 550 chipset, including those by GeCube, Gigabyte, MSI, PowerColor, Sapphire, Tul, VisionTek and Yuan (with V3 or later)
ATI TV Wonder Elite (V3 or later)
AVerMedia A187 (Purity 3D MCE 250) PCI
AVerMedia M150
AVerMedia M175
AVerMedia M1A2 Dual Tuner PCI
AVerMedia UltraTV Media Center PCI 500
AVerMedia UltraTV Media Center PCI 550
AVerMedia UltraTV 1500MCE
AVerMedia M038 USB
AverMedia M780
Creative Labs Video Blaster Digital VCR
Hauppauge HD-PVR
Hauppauge Roslyn
Hauppauge WinTV-HVR-1600
Hauppauge WinTV-HVR-1800
Hauppauge WinTV-HVR-1950
Hauppauge WinTV HVR-2200
Hauppauge WinTV-PVR-150
Hauppauge WinTV-PVR-150MCE
Hauppauge WinTV-PVR-250
Hauppauge WinTV-PVR-250BTV
Hauppauge WinTV-PVR-250MCE
Hauppauge WinTV-PVR-350
Hauppauge WinTV-PVR-500MCE
Hauppauge WinTV-PVR-USB2
HAVA Gold, Platinum and Wireless HD
nVidia DualTV
Plextor ConvertX M-402U
Plextor ConvertX TV-402U
Prolink Pixelview PlayTV P7000
Provideo PV256 Series
Provideo PV258 Series
Provideo PV259
Provideo PV358T
Vista View DA-1N1-I
Vista View Saber 2020
Yuan MPG-600
Yuan MPG-843
Yuan PG-600
Other MPEG-2 encoding cards based on the Conexant IVAC-15, IVAC-16, CX23415, CX23416 or StreamMachine 2210 Codec should function correctly but may not have been tested.
Tuners compatible with Windows MCE should work, but not all of them have been tested.
Linux
Hauppauge WinTV-HVR-1600
Hauppauge WinTV-HVR-1800
Hauppauge WinTV-PVR-150
Hauppauge WinTV-PVR-150MCE
Hauppauge WinTV-PVR-250
Hauppauge WinTV-PVR-250MCE
Hauppauge WinTV-PVR-350
Hauppauge WinTV-PVR-500MCE
Hauppauge WinTV-PVR-USB2
Supported DVB-T/C/S/S2 Tuners (requires SageTV V6 or later):
Windows
Cinergy 2400i DT Capture
Dvico FusionHDTV USB
FireDTV DVB-C/CI (supports PayTV through CAM/CI)
FireDTV DVB-S (supports PayTV through CAM/CI)
FireDTV DVB-S2 (supports PayTV through CAM/CI)
FireDTV DVB-T/CI (supports PayTV through CAM/CI)
FloppyDTV C/CI (supports PayTV through CAM/CI)
FloppyDTV S (supports PayTV through CAM/CI)
FloppyDTV S2 (supports PayTV through CAM/CI)
FloppyDTV T/CI (supports PayTV through CAM/CI)
Hauppauge WinTV Nova-T-Stick USB
Hauppauge WinTV Nova-T-USB
Hauppauge WinTV Nova-S-USB2
Hauppauge WinTV Nova-T PCI
Hauppauge WinTV Nova-T-500
Hauppauge WinTV Nova-S-Plus
Hauppauge WinTV Nova-HD-S2
Hauppauge WinTV HVR-900
Hauppauge WinTV HVR-1100
Hauppauge WinTV HVR-1300
Hauppauge WinTV HVR-2200
Hauppauge WinTV HVR-3000
Hauppauge WinTV HVR-4000
Kworld VStream DVBT100
Kworld VStream XPERT DTV-DVB-T PCI
KWorld DVB-T USB 339U (dual tuner)
KWorld DVB-T PCI 160 (dual tuner)
Leadtek DTV1000
Nebula DigiTV (DVB-T tuner)
Pinnacle PCTV Dual DVB-T Pro PCI
Pinnacle PCTV USB Stick, model PCTV 70e (DVB-T tuner)
Provideo’s PV913
Technotrend Budget C-1500 (supports PayTV through CAM/CI)
Technotrend DVB-T/C 1300 (supports PayTV through CAM/CI)
Technotrend S-1500
Technotrend S-2400
Technotrend S2-3200
VisionPlus/Twinhan TwinhanDTV (VP-3021)
Most USB Stick devices using the Dibcom 7700 Chipset should work, but not all of them have been tested.
Most other BDA based DVB-T/C/S cards should work with Version 6.2 or later but may not have been tested. If you have tested a specific card that is not listed, please report your findings to us at support@sagetv.com.
Linux
Tuners that have a Linux kernel DVB-T/S/C driver should work; but not all tuners have been tested.
Supported OTA HDTV Tuners (requres SageTV V5 or later):
Mac
Hauppauge WinTV-HVR-950
Pinnacle PCTV HD (800e)
El Gato EyeTV Hybrid (original version w/out QAM tuner)
Windows
ATI HDTV Wonder
AVerMedia AVerTVHD MCE A180
AverMedia M780
Conexant CX23883 ATSC based cards
Dvico FusionHDTV5 Lite
Dvico FusionHDTV3 Gold-T
Dvico FusionHDTV5 Gold Plus
Dvico FusionHDTV5 USB Gold
Hauppauge WinTV-HVR-950
Hauppauge WinTV-HVR-950Q
Hauppauge WinTV-HVR-1250
Hauppauge WinTV-HVR-1600
Hauppauge WinTV-HVR-1800
Hauppauge WinTV-HVR-1950
OnAir HDTV-GT
Philips x237 PCI 7133 ATSC based cards
Silicon Dust HDHomeRun
Vbox Cat’s Eye 164e PCI-e dual tuner
VBox DTA-150/151 ATSC card
VBox USB-A 3560 device
VisionTek TV wonder 600 USB
Vista View DA-1N1-I
Most other BDA based ATSC cards should work with Version 5 or later but may not have been tested. If you have tested a specific card that is not listed, please report your findings to us at support@sagetv.com.
Linux
ATI HDTV Wonder
AVerMedia AVerTVHD MCE A180
Dvico FusionHDTV5 Lite
Dvico FusionHDTV3 Gold
Dvico FusionHDTV3 Gold-T
Dvico FusionHDTV5 Gold Plus
FusionHDTV USB
Silicon Dust HDHomeRun (native support, no driver install required)
Tuners that have a Linux kernel driver should work, but not all tuners have been tested. For some tuners with Linux drivers, see:
ATSC PCI cards
Supported ClearQAM HDTV Tuners (requres SageTV V6.2 or later):
Mac
Silicon Dust HDHomeRun (native support, no driver install required)
Windows
AverMedia M780 (Windows Vista only)
Hauppauge WinTV-HVR-950Q
Hauppauge WinTV-HVR-1250
Hauppauge WinTV-HVR-1600
Hauppauge WinTV-HVR-1800
Hauppauge WinTV-HVR-1950
OnAir HDTV-GT
Silicon Dust HDHomeRun
Linux
Dvico FusionHDTV5 Lite
Dvico FusionHDTV3 Gold
Dvico FusionHDTV3 Gold-T
Dvico FusionHDTV5 Gold Plus
Silicon Dust HDHomeRun (native support, no driver install required)
Tuners that have a Linux kernel DVB driver should work, but not all tuners have been tested.
Supported TV Tuners with Software Encoding (requires SageTV V5 or later):
Windows
Hauppauge WinTV-HVR-950
Hauppauge WinTV-HVR-950Q
Hauppauge WinTV-HVR-1250
Plextor AV100U
Plextor TV100U
Most other WDM capture devices should work with Version 5 or later but have not yet been tested. The above list will be updated as other cards are tested. If you have tested a specific card that is not listed, please report your findings to us at support@sagetv.com.
Video Card: PCI/AGP bus graphics card with overlay. NOTE: While it is recommended that your Windows graphics card drivers support DirectX9 for optimum performance, it is not required.
Software:
DirectX v9.0 or higher available freely from Microsoft.
Java Runtime Environment 1.4 or higher available freely from Sun Microsystems.
Does anyone have SageTV Placeshifter?
Thanks
Thank you ‘Kennii blows’ 13, glad someone knows how to post usefull info.
and my tuner is supported, yay, looks like a decent app, i might give it a go.
Beware: not-a-virus:FraudTool.Win32.SpyLocked.an found.
the Cracked .exe contains a backdoor trojan :
sagetv.client.v6.4-recoil.rar//crack/SageTVClient.exe Firefox Denied: not-a-virus:FraudTool.Win32.SpyLocked.an