Releaselog

Sacred 2 Fallen Angel CloneDVD-WARG

Here is a nice new RPG by WARG. If you have enough bandwidth to download 12 GB then go for it lol. Sacred 2: Fallen Angel is the second full game in the Sacred series. It is a prequel which takes place 2,000 years before the events of Sacred. Like its predecessor, the game takes place in a fantasy setting. A new game engine means that the game is rendered in perspective correct 3D, whilst retaining the viewpoint found in older isometric games. Video game designer Bob Bates has been involved in its production. The game also includes a video sequence with the power metal band Blind Guardian, who also made a theme song for the game.

A mysterious force called T-Energy is the source of all life and magic in Ancaria. It was originally solely under the control of the ancient race of Seraphim, however over time as they lost interest in the world they gave some of their control to the High Elves. With this power, the High Elves quickly became the dominant race of Ancaria.

A power struggle is raging between two factions within the High Elves. The nobility and clergy are each trying to gain control over the T-Energy. Other races take advantage of the distraction the conflict provides and try to gain control of the T-Energy themselves, so they can become the dominant and most powerful race. As these events unfold, the T-Energy goes increasingly out of control and changes into a destructive force. A force that mutates creatures, destroys cities, and renders entire regions uninhabitable. The campaign selection you make will determine whether your story involves healing the land, or intensifying the chaos.

Campaigns
There are two campaign path choices: Light and Shadow. The player will select the path they want to follow at the beginning of the game, and this choice determines the ultimate goal of their character. Throughout the game, the paths intersect at different points. In one path you may be asked to help defend a town, while in the other you may be the person attacking the town.

World
Sacred 2: Fallen Angel features a very large and open world, with seamless transitions from region to region so you don’t have to wait for new regions to load when you switch between them. The surface map is 22 square miles. The world also contains dungeons and caves going as far as 2 levels deep, and surface dwellings of up to four stories.

Classes
There are 6 playable fixed-gender classes, each of which has different class-specific equipment and animations that are dependent on the weapons being wielded. Maximum character level will be at least 200.

Mounts
Players will be able to use horses as they could in Sacred 1, for transportation as well as in combat. Each class will also get access to a special unique mount type via a quest. Special mounts can also be used for transportation as well as battle.

Quests
Ancaria is full of a variety of quest types. Current figures indicate that there will be 100 core campaign quests as well as hundreds of side quests. The side quests will include character specific quests, as well as quest related to the specific deity you choose when creating your character.

Customization
Character customization is accomplished in a variety of ways. In addition to choice of using a mount or not, and if so which, there is a wide variety of equipment and weapon types. Players will also be able to modify their class specific combat arts (ex: magic spells). An example of customization in combat arts is modifying a lightening spell to either strike with more force, or strike with slightly less force but chain out to additional enemies.

System Requirements

  • 2,4 GHz Processor
  • 1 GB RAM
  • 20 GB HDD
  • 256 MB Graphic Card

Developer: Ascaron
Genre: Action role-playing
Platforms: Microsoft Windows, PlayStation 3, Xbox 360

Release Name: Sacred.2.Fallen.Angel.CloneDVD-WARG
Release Date:13/10/08
Size: 12.28 GB
Protection : securom
Links: NFOGamespotIGNWikipediaTorrent

Comments (789)

Feel free to post your Sacred 2 Fallen Angel CloneDVD-WARG torrent, subtitles, samples, free download, quality, NFO, rapidshare, megashares, sendspace, megaupload, filefactory, netload, crack, serial, keygen, requirements or whatever-related comments here. Don't be rude (permban), use only English, don't go offtopic and read FAQ before asking a question. Owners of this website aren't responsible for content of comments.
Pages: « 1 2 3 4 5 [6] 7 8 » Show All
  1. EarlZ
    November 13th, 2008 | 21:44

    You dislike vista but you’ll stick with windows server2008, only shows how much you know.Anyway end of discussion for very obvious reasons.

  2. EarlZ
    November 14th, 2008 | 13:09

    A new major patch is coming out soon, hopefully adhome can still crack it =)

  3. Red07
    November 15th, 2008 | 02:45

    Hi everyone.
    Is there a working crack for version 2.10.1?
    The one Ive got doesnt let me add stat points.

  4. adhome
    November 15th, 2008 | 08:56

    Sure..
    http://sacred2.kilu.de/Sacred_2_V1.10.1_DRM_Fix_V0.2.rar
    (SOrry for wrong filename. V2.10.1 is this)

  5. EarlZ
    November 15th, 2008 | 10:00

    Glad to see adhome is still here on this topic.

  6. patrick
    November 15th, 2008 | 11:26

    Hi
    Do I need to start new game if i start game in game without any patch and get to lvl 5, from this lvl i get only 1 XP per kill even if i reinstall game patch to latest patch and use crack “Sacred_2_v2.12.0_crack.rar” ?

  7. EarlZ
    November 15th, 2008 | 13:44

    @patrick

    What level are the monsters your attacking ?

  8. patrick
    November 15th, 2008 | 16:29

    About lvl 2, when i kill leader of group i get 2 Experiens not 1 :|

  9. TehDreamWalker
    November 15th, 2008 | 16:49

    Hello once again, well my friend has a problem, once he reaches lvl 19-20 (”the other side of thegate problem i suppose” (yes i’ve read everything)) the npc’s are saying that “you have a cheap copy, you should buy the game bla bla bla” i think you get it, and it’s only for chars 19-20+ lvl, and if I try his savegame on my sacred game copy in my pc (same hardware,& 32 winxp SP3) it works for me, but not for him, he has reinstalled sacred, enabled/disabled firewall/antivirus his sacred game files are completely same as mine that are working, and he tried the “2.12 FIX” crack, and got an err saying about “incorrect program version” or something like that (it’s mentioned before 1 time, but i haven’t found about solution so i’m posting it) 32bit Win XP SP3 AMD duo core 4400+ 2gb ram ati 1950x pro video card, and he doesn’t get the “error patching” thing when starting game, i hope you can think of something, waiting for response
    Teh Dream Walker

  10. EarlZ
    November 15th, 2008 | 17:09

    @509

    Let him update the game to 2.12 then copy ALL the files in Adhome’s crack and let him run the game using the sacred2.exe (6kb loader) and not the renamed sacred2_.exe that should solve his problems.

  11. Twonuts
    November 15th, 2008 | 17:28

    I finally found a way to remove the securom license information key in the registry, you just need to use a software like AMUST Registry Cleaner, which works on xp64 (only in full version software). Don’t forget to clean all other securom infos (keys + folder) before launching sacred2.

  12. TehDreamWalker
    November 15th, 2008 | 17:40

    @ EarlZ
    Well his whole sacred installation v2.12 and adhome crack is EXACTLY THE SAME as mine as i mentioned before, and i’m pretty sure that he runs the right .exe file, if it would be so easy i wouldn’t ask for help here :) thanks for trying anyway, any other ideas? :/

  13. EarlZ
    November 15th, 2008 | 18:39

    @DreamWalker

    Did he ever start the game with adhomes crack or did he continue a game using adhomes crack ?

    @Twonuts
    Great find, hopefully someone else can test it out.

    @patrick
    Try hitting mobs that are higher in levels, since you’ve already out leveled those mobs, this is rpg basics.

  14. @ EarlZ
    November 15th, 2008 | 19:14

    Well, we both started playing with 2.10 then upgraded to 2.12, got adhome crack, and started new chars, and for testing, he made 3 chars 19 or 20 (just in case char was messed up) and he got stuck with that npcs problem with all chars, so the short answer would be:
    he started 3 different chars with adhome’s crack, and all of em got the same problem at about the same place

  15. TheDeamWalker
    November 15th, 2008 | 19:17

    Sorry instead of nick i wrote @ EarlZ :S, and either there’s no edit button, or i’m blind, but it makes me think tough how could it be an edit button without registration? ;D

  16. EarlZ
    November 15th, 2008 | 19:41

    @TheDeamWalker

    I see, thats a tough one. Ive made about 9 characters using adhomes crack and all of them past level 45+ never had any issues. sorry cant be much of a help.. if you can upload your save file on rapidshare i can take a look and see if the problem persists on my end.

  17. TehDreamWalker
    November 15th, 2008 | 20:23

    @ EarlZ
    yea, i have few chars over 20 lvl, with no problems, but my friend does have problems, and i’m not the type of person that plays rpg alone, when you can do it with friend ;D and i dont like rapidshare, please pm me on skype:area661, or email: tehdreamwalker@gmail.com thank you for help ;], but i still need a solution ;/

  18. adhome
    November 15th, 2008 | 20:46

    Hallo,

    first glad to see somebody found a obvious solution for XP64 I suggested 4 pages before….

    @TehDreamWalker: Patcher will give error “incorrect program version”. So no patching. No Crack and you get Nag ^^

    Sombody before, got same error. We found no solution.
    I tink, he has a different game version. Perhaps patching to 2.12.0 was fault.

    He can try this. But i dont’t think, it will help:
    1) Rename sacred2.exe to sacred2_Patcher.exe
    2) Rename sacred2_.exe to sacred2.exe
    3) Start sacred2.exe. Still Message “incorrect program version”? (This is a question!!)
    4) Start Sacred2_Patcher.exe. Dialog will apear and you can select a file in directory. Select sacred2.exe
    5) Start Sacred2.exe

  19. TehDreamWalker
    November 15th, 2008 | 22:01

    @ adhome
    the install of the 1st patch didn’t helped, the “green” or the “crack fix” still says incorect version, and the 1st crack still gives no errors but npc’s are still selling the game (which is not funny for me;D), and the “fix crack” says incorrect version for me too, and 1st crack ALWAYS gives me “error patching” on 1st run, so i just rerun game and it works, but for him still those stupid npc’s…, our version is 2.12.0 build 1419 EN_UK lang,but i personally think that his game for some reason doesn’t get patched, so i’d be happy if you could tell me how to patch the game manually, so i could see if it works, thanks for trying to help ;]

    Me

  20. EarlZ
    November 16th, 2008 | 06:00

    you can manually download the patches at update.sacred2.com

    download the update to 2.10 then to 2.11 then 2.12 dont skip the 2.11 update.

  21. EarlZ
    November 16th, 2008 | 06:16

    @Adhome,

    Is it possible that your loader can add commandline settings to the game like -nocpubinding or -skipopenal ?

  22. TheDreamWalker
    November 16th, 2008 | 08:29

    Well, the installation is good, we haven’t skipped anything, we cracked fine, we run the game like we should run it, we’re running the delsecurom thingie, and the game is acting like he’s not patched, but it doesn’t give any errors, i hope adhome could tell me how to manually patch it :] thanks again for trying to help

  23. adhome
    November 16th, 2008 | 08:57

    I can not understand you. You are mixing the word patched.
    Patch is for me the Patch from ascaron. To update the Version.

    My Crack use a loader. Call is error from loader or so. Only to be sure we are talking about same.

    “and the game is acting like he’s not patched”
    So, no patching to 2.12.0 ?
    If patched or not can be see by program start in the green text. There is the versionnumber.

    Manually patching is not possible. It use a differential patcher.

    If you still have 2.10.0 and can not patch, you cann not use crack 2.10.1 !!!
    You must try to patch to 2.10.1 first. Or better 2.12.0 and use Crack for 2.12.0
    Test Gameversion befor cracking!!! Crack will overwrite Versioninfo with wrong information.
    Test Updating to 2.12.0 first without cracking.
    Ask in official forum why you can not udate to 2.12.0 properly.

    You can not uppdate, after you copyed my crack in installationdirectory. Crack will overwrite orginal sacred2.exe

  24. EarlZ
    November 16th, 2008 | 11:09

    adhome is ignoring me =(

  25. TehDreamWalker
    November 16th, 2008 | 11:57

    @ adhome
    sorry (i’m not american ;D) i suppose i mixed word patch, what i meant was
    that the game is correctly updated, up to 2.12 1419 en_uk version, with no errors, works fine, but it acts like without running a crack(well, it gives exp, you can add skill points, but npc’s are nagging to buy the game, so i think the loader isn’t doing his work) so i’ve wanted to ask how to manually create the loader, or what it’s supposed to do, i hope i’ve wrote clearly now

  26. EarlZ
    November 16th, 2008 | 12:12

    @TehDreamWalker

    That only happens on my end if i attempt to run the game w/o adhomes crack, hopefully he can still crack the new upcoming patch.

  27. adhome
    November 16th, 2008 | 14:54

    @TehDreamWalker: Try steps in post 518
    You get 6kb sacred2_Patcher.exe from Step 1)
    Take orginal sacred2.exe 8MB V2.12.0 (you should always have a copy from it)
    Apply Patcher on it. Patcher will create 2 Files:
    sacred2.exe 6kb
    sacred2_.exe 8MB

    Perhaps you can upload your orginal 8MB sacred2.exe i can compare it to german one.
    Perhaps in Patch they changed something in UK Version.

    @EarlZ: I will not include commandline support. Perhaps its working without.or you can include parameters in ini file.
    And i do not ignoring you. I do have simple now answer ^^

  28. TehDreamWalker
    November 16th, 2008 | 15:36

    tkr.projektas.lt/sacred2.exe here it is our original
    tkr.projektas.lt/sacred2_.exe patched original

  29. EarlZ
    November 16th, 2008 | 16:16

    what ini file do you mean, i wish to add -nocpubinding and -skipopenal

  30. adhome
    November 16th, 2008 | 16:17

    Your files are identical with german ones.
    Ok…

    Extract again Crack and overwrite files.
    You will have 6kb sacred2.exe
    and 8MB sacred2_.exe

    Start Sacred2.exe (6kb)
    A Dialog will apear, to buy the game. You click play.
    This is important!!!

    Game starts without error.

    Is this correct?

  31. TehDreamWalker
    November 16th, 2008 | 18:00

    Yes it starts without any errors
    you can either create new char and play normal until lvl 20, or play the not working 20 lvl ones (by not working i mean-that npc thingie)

  32. adhome
    November 16th, 2008 | 18:53

    Perhaps crack is working, but there is a new NAG.
    Please upload the savegame + chest.sacred2chest
    Perhaps it’s not working by me too.

  33. TehBugWalker
    November 16th, 2008 | 19:12

    tkr.projektas.lt/nws.rar
    not working saves+chest

  34. adhome
    November 16th, 2008 | 19:46

    Ok, Savegames are working. No problems.

    Why do you get no error “incorrect version” ? (it should not, but you write about it above)

    You must copy paul.dll + s2logic.dll into \Sacred 2 – Fallen Angel\system directory.
    Only start game with 6kb sacred2.exe

    Sorry,I give up.

  35. TehDreamWalker
    November 16th, 2008 | 19:57

    is there any manual way to do what loader does? i think for some reason the loader doesnt modify the sacred process ;/

  36. adhome
    November 16th, 2008 | 20:27

    No, i don’t know other way. I must patch after unpacking.
    You can look in Taskmanager.
    You start sacred2.exe
    You will se in Taskmanager sacred2.exe + Sacred2_.exe
    After you press play and Display goes black, sacred2.exe will patch sacred2_.exe and unload itself.

    Do you have special Memory Flags in boot.ini ?

  37. Tehblablabla
    November 16th, 2008 | 20:32

    [boot loader]
    timeout=30
    default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
    [operating systems]
    multi(0)disk(0)rdisk(0)partition(1)\WINDOWS=”Microsoft Windows XP Professional” /noexecute=optin /fastdetect /usepmtimer

    boot ini ;D

    well,i could freeze sacred2_.exe and try to patch it with any memory editing software manualy, but i do not know what to look for

  38. adhome
    November 16th, 2008 | 20:42

    /noexecute=optin /fastdetect /usepmtimer

    This can be the problem.
    Please try to use only /fastdetect switch.
    Reboot Computer and try again.

  39. TheDreamWalker
    November 16th, 2008 | 21:14

    It Works after i found out that he haven’t patched the DEFAULT sacred2.exe, but instead he’s patched an already patched sacred2.exe, well, what i’ve done was:
    ——————————————————–
    1) Rename sacred2.exe to sacred2_Patcher.exe
    ***2) TAKE THE ORIGINAL SACRED2.EXE AND PUT IT INTO SACRED/SYSTEM DIR***
    3) Start Sacred2_Patcher.exe. Dialog will apear and you can select a file in directory. Select sacred2.exe
    4) Uploaded it to his computer VIA radmin ;D and he tested it ant it works fine, THANKS FOR HELP! ;]

  40. TehDreamWalker
    November 16th, 2008 | 21:18

    The 518 Post is the fix, but instead of the patched executable you have to use original ;]

  41. adhome
    November 16th, 2008 | 21:31

    ?!?! confusing…

    There is no patched sacred2.exe
    sacred2_Patcher.exe will only rename files.

    Ok, nice you found your solution. Then the try and errors was not needles.

  42. EarlZ
    November 17th, 2008 | 04:26

    Basically he used the wrong .exe instead of the original one must have been trying a different crack.

  43. adhome
    November 17th, 2008 | 06:45

    I suggest using new Reloaded crack.
    Time will say if it is compatible with german/UK one.

  44. EarlZ
    November 17th, 2008 | 07:31

    Adhome, do you have reliable download links for the reloaded crack ?

  45. EarlZ
    November 17th, 2008 | 18:22

    Tested the reloaded crack and it works as intended, i think they totally removed the DRM.

    Adhome, thanks for your work so far. looking forward to you in cracking the next update before reloaded does ;)

  46. EarlZ
    November 17th, 2008 | 20:12
  47. Jeff
    November 19th, 2008 | 01:28

    This crack (Reloaded) doesn’t works for me. The game starts and shows their pretty loading screen, it loads up to loading autoexec.txt. Then the screen blinks sometimes and it stays black afterwards. My system is Vista 64. Anyone experiencing the same problem? I already tried to reinstall, same happens.

  48. adhome
    November 19th, 2008 | 08:11

    Try play without crack and you will get same error. Game has 12h testperiod.

    Look at your firewall or messages pop up in background.
    Disable Firewall.

  49. xyzz
    November 19th, 2008 | 17:22

    Hi guys,

    can anyone upload the original sacred2.exe ?
    I think i replaced it in the first time..
    Many thx, cheers!

  50. EarlZ
    November 19th, 2008 | 20:20

    @Adhome,

    He is using the reloaded crack, so there should be no “test periods”

  51. ilias
    November 19th, 2008 | 21:02

    thanX for the whole effort @Adhome and EarlZ.
    I have installed>updated(to 2.10+to 2.12> applied crack of reloaded but I have an issue. Right after the introduction cinematic my screen goes black (but sacred still runs normally and plays sounds….)…strange cause I’m near the “recommended” side of the requirements needed to play…someone with the same issue?
    cheers

  52. ilias
    November 19th, 2008 | 23:15

    ignore my above…just fixed it from a previous post in here mentioned…it was my X-Fi Creative card that caused that. solved by adding the “-skipopenal” in the shortcut properties-target line.
    c ya

  53. hey
    November 20th, 2008 | 03:51

    I just downloaded this.. and frankly i need some advice on how to go about installing… the files i downloaded are not images and cannot be mounted.. they are seperated into two folders. disc one and disc two both containing several r.1 r.2 ect files in it…

    help?

  54. EarlZ
    November 20th, 2008 | 06:21

    you need donwload winrar and extract the files

  55. Jeff
    November 20th, 2008 | 12:21

    It’s working now. I guess it was the restart.

  56. Jeff
    November 20th, 2008 | 13:53

    Actually, it was because I had disabled the firewall.

  57. Jo
    November 25th, 2008 | 03:03

    I wanted my mind clear as to why some CE textures were bugged and what not in the game.

    So I bought a CE version and did an install…I have 2 partitions on my pc so I installed a copy on both partitions then I started to compare the 2 games with a comparison software.

    I was able to find out that the regular game as 3 levels of graphic quality, high, medium and low. In the game they are under folders called HQ, MQ and LQ.

    But I was astounded to discover that the game uses graphics from the 3 ranges of quality at the same time to make the game. Because the way the folders are laid out in your pc.

    In the CE version the textures folders are pretty much stand alone but the folder structure is different, the files amount is different and the size of some of them are different as well as the naming convention for the texture files.

    So because of the difference in the folder system, naming convention of CE you will get graphic bugs for sure because the game is trying to associate textures that have a different name to a 3d model in the game. The fact that the folder structure and naming convention is different does not help at all.

    What puzzles me even more is that sacred offers 3 basic settings of quality but they amount to be the same no matter what option of the 3 you would use because they take their graphics from the same pools all the time…I would say the difference is in the rendering engine.

    It is pretty clever programming if you ask me but the CE will remain a mess unless they issue a patch that addresses the file patch issues in the game….i guess this is not a big priority for them right now and I do not see this corrected anytime soon but here it is…Sacred 2 deep dark secret!!!!!!

  58. EarlZ
    November 28th, 2008 | 15:57

    @Adhome

    2.31 is out, can you make a loader for it ?

  59. adhome
    November 29th, 2008 | 00:33

    Sure:
    Crack for 2.31.0
    sacred2.kilu.de/Sacred2%20V2.31.0%20Crack%20V1.0.rar

  60. EarlZ
    November 29th, 2008 | 02:15

    you are the best!

  61. EarlZ
    November 29th, 2008 | 02:34

    My save games wont load, i get a crash to desktop when loading them =(

  62. EarlZ
    November 29th, 2008 | 02:38

    My mistake i ran the sacred2_ instead of the loader.

  63. john
    November 29th, 2008 | 02:56

    hello, how do i install the new patch(2.31), i downloaded it but when i try to update it says that it can’t find the installation of the game, is there a way to update it without re-installing the game? :(

  64. EarlZ
    November 29th, 2008 | 04:25

    Restore the original 2.12 exe

  65. Andrei
    November 29th, 2008 | 09:26

    Please, upload crack for 2.31.0 to rapidshare of depositfiles.

  66. ilias
    November 29th, 2008 | 09:32

    Hi Adhome,

    I see that the “read me” inside the 2.31 crack is for the 2.12 Is it going to work with the 2.31 update?
    THX

  67. adhome
    November 29th, 2008 | 09:41

    @ Andrei:
    http://rapidshare.com/files/168453588/sac2_2.31.0.rar

    @ilias: Jup. Same readme. Butt different crack.Perhaps i forgot to change versioninfo ^^
    Was very late yesterday.

  68. Andrei
    November 29th, 2008 | 09:41

    i cann’t download from _sacred2.kilu.de/Sacred2%20V2.31.0%20Crack%20V1.0.rar
    upload it ti rapidshare or depositfiles

  69. Andrei
    November 29th, 2008 | 09:44

    @adhome
    Thanks

  70. ilias
    November 29th, 2008 | 09:54

    thanX man!

  71. ilias
    November 29th, 2008 | 10:00

    Andrei,

    its strange, it worked for me. just copy it and paste it on the explorer/Firefox address bar (but without the underscore in front) then the “save as” pop up should appear to you.
    Regards

  72. EarlZ
    November 29th, 2008 | 10:01

    http://rapidshare.com/files/168486881/Sacred2_V2.31.0_Crack_V1.0.rar

    Hosted on my own account so there wont be any download limit.

  73. EarlZ
    November 29th, 2008 | 10:05

    @Adhome

    Can you make your loader launch the game w/ -nocpubinding command line as im getting better performance with that command line enabled.

  74. adhome
    November 29th, 2008 | 10:30

    Later perhaps.

    I heared, that the old 5Min Kickback to Manue Bug is bag.
    Can somebody confirm that?

  75. EarlZ
    November 29th, 2008 | 10:39

    @Adhome

    Yeah its there, the screen fades out and returns you to the menu, I dont think its a but, its part of the copy protection to annoy you.

  76. Andrei
    November 29th, 2008 | 10:54

    @ilias
    I tried to download it from work, but it not worked.
    From home it works.

  77. Andrei
    November 29th, 2008 | 12:45

    Yes, after 5 mins the game returns you to the main menu.

  78. Black Phoenix
    November 29th, 2008 | 12:51

    Also i’ve noticed that i can’t go thought the portal at the starting island in a lan game mode.

  79. john
    November 29th, 2008 | 15:01

    hello, the crack works perfectly for me, just copy slogic.dll sacred.exe and the sacrec_.exe, if you copy paul.dll the game will warp to the menu after 5mins. thanks for the crack!

  80. john
    November 29th, 2008 | 15:05

    Hi, sorry, ignore my last post,my mistake, the game is warping yet :P

  81. adhome
    November 29th, 2008 | 15:09

    Can somebody confirm that?
    I can still not portal from island.

  82. EarlZ
    November 29th, 2008 | 15:20

    @john

    Thanks for the tip, and i thought the paul.dll supplied was still the original one.. i just copy pasted everything.

  83. adhome
    November 29th, 2008 | 16:09

    Something is confusing me….

    The Portal Bug is also in the pure 12h DEMO period with lvl1 Char.

    I deleted Savegames. Restored original files. Created LvL1 Char in MP
    Can still not portal.

  84. user1801
    November 29th, 2008 | 16:22

    @adhome
    confirm – game jumps to main menue after exactly 4min – not just once, but every time a ame is loaded.

  85. EarlZ
    November 29th, 2008 | 16:23

    They must have added a new new stuff on the 2.31

  86. qwerty
    November 29th, 2008 | 19:36

    Adhome, please do something about this 5 minutes bug, or most of us will loose sanity…

  87. EarlZ
    November 29th, 2008 | 19:37

    Again it is not a bug, it is party of the copy protection kicking in.

  88. Markos
    November 29th, 2008 | 21:33

    Yeah I can confirm it too.After about 4-5 min “new” protection or whatever it is kicks in and sends me back to main menu.And not just once after every load (etc..getting back inside)…

    Maybe good idea is just to stick to 2.12 patch/AdHome’s 2.12 fix and enjoy the game (thats what am gonna do)…at least until AdHome can fix this (if he has time and if this thingy is fixable)

    But anyway even without this, AdHome thank you a lot man!

    We all really appreciate your help and everything that you did. :)

  89. adhome
    November 30th, 2008 | 11:28

    New Crack. It was so easy….. Just renamed exe file.

    sacred2.kilu.de/Sacred2%20V2.31.0%20Crack%20V2.0.rar
    Start Game with sacred2_loader.exe

  90. Joseph
    November 30th, 2008 | 11:30

    I also confirm it, it returns to main menu every time after 5 minutes. If you can fix this I’ll be very grateful.

  91. adhome
    November 30th, 2008 | 11:48

    @Joseph: Use new crack from 589

  92. acantoni
    November 30th, 2008 | 12:28

    adhome first of all thanks for your efforts.

    I have a question when i start sacred2 v 2310 (with crack v2.0)

    I follow instructions and launch delete securom and overwrite the files, then when i launch the loader i still receive the “license information window” with the start, next, abort options.

    Am i supposed to launch the game in demomode and then the loader kicks in to make it full version?

    Or am i supposed to click next and validate the game somehow (which doesnt seem to be working)

    Thank you very much

  93. adhome
    November 30th, 2008 | 12:33

    You need to click start each time.
    The loader will make game to full after start (in Memory)

  94. EarlZ
    November 30th, 2008 | 13:48

    Anyone else tried the new crack ? im back to 2.12 for the time being.

  95. adhome
    November 30th, 2008 | 14:21

    Yes, it was tested many times.

  96. user1801
    November 30th, 2008 | 14:46

    thanks adhome. much appreciation for your efforts.
    tested and works flawlessly…

  97. EarlZ
    November 30th, 2008 | 15:14

    Ok, will update again to 2.31 and try the v2 of the crack.. adhome can you add the -nocpubinding ?

  98. john
    November 30th, 2008 | 15:28

    Thank you adhome, the crack is working perfectly now. :D

  99. adhome
    November 30th, 2008 | 15:36

    @EarlZ:
    Try using Commmandswitches with loader. It is a different one and perhaps support this.

  100. TehDreamWalker
    November 30th, 2008 | 16:15

    For some reason i can’t dl from the place adhome uploaded, could someone send it to rapidshare or sth like that?

Pages: « 1 2 3 4 5 [6] 7 8 » Show All

Leave a reply