Releaselog

Sacred 2 Fallen Angel CloneDVD-WARG

Here is a nice new RPG by WARG. If you have enough bandwidth to download 12 GB then go for it lol. Sacred 2: Fallen Angel is the second full game in the Sacred series. It is a prequel which takes place 2,000 years before the events of Sacred. Like its predecessor, the game takes place in a fantasy setting. A new game engine means that the game is rendered in perspective correct 3D, whilst retaining the viewpoint found in older isometric games. Video game designer Bob Bates has been involved in its production. The game also includes a video sequence with the power metal band Blind Guardian, who also made a theme song for the game.

A mysterious force called T-Energy is the source of all life and magic in Ancaria. It was originally solely under the control of the ancient race of Seraphim, however over time as they lost interest in the world they gave some of their control to the High Elves. With this power, the High Elves quickly became the dominant race of Ancaria.

A power struggle is raging between two factions within the High Elves. The nobility and clergy are each trying to gain control over the T-Energy. Other races take advantage of the distraction the conflict provides and try to gain control of the T-Energy themselves, so they can become the dominant and most powerful race. As these events unfold, the T-Energy goes increasingly out of control and changes into a destructive force. A force that mutates creatures, destroys cities, and renders entire regions uninhabitable. The campaign selection you make will determine whether your story involves healing the land, or intensifying the chaos.

Campaigns
There are two campaign path choices: Light and Shadow. The player will select the path they want to follow at the beginning of the game, and this choice determines the ultimate goal of their character. Throughout the game, the paths intersect at different points. In one path you may be asked to help defend a town, while in the other you may be the person attacking the town.

World
Sacred 2: Fallen Angel features a very large and open world, with seamless transitions from region to region so you don’t have to wait for new regions to load when you switch between them. The surface map is 22 square miles. The world also contains dungeons and caves going as far as 2 levels deep, and surface dwellings of up to four stories.

Classes
There are 6 playable fixed-gender classes, each of which has different class-specific equipment and animations that are dependent on the weapons being wielded. Maximum character level will be at least 200.

Mounts
Players will be able to use horses as they could in Sacred 1, for transportation as well as in combat. Each class will also get access to a special unique mount type via a quest. Special mounts can also be used for transportation as well as battle.

Quests
Ancaria is full of a variety of quest types. Current figures indicate that there will be 100 core campaign quests as well as hundreds of side quests. The side quests will include character specific quests, as well as quest related to the specific deity you choose when creating your character.

Customization
Character customization is accomplished in a variety of ways. In addition to choice of using a mount or not, and if so which, there is a wide variety of equipment and weapon types. Players will also be able to modify their class specific combat arts (ex: magic spells). An example of customization in combat arts is modifying a lightening spell to either strike with more force, or strike with slightly less force but chain out to additional enemies.

System Requirements

  • 2,4 GHz Processor
  • 1 GB RAM
  • 20 GB HDD
  • 256 MB Graphic Card

Developer: Ascaron
Genre: Action role-playing
Platforms: Microsoft Windows, PlayStation 3, Xbox 360

Release Name: Sacred.2.Fallen.Angel.CloneDVD-WARG
Release Date:13/10/08
Size: 12.28 GB
Protection : securom
Links: NFOGamespotIGNWikipediaTorrent

Comments (757)

Feel free to post your Sacred 2 Fallen Angel CloneDVD-WARG torrent, subtitles, samples, free download, quality, NFO, rapidshare, megashares, sendspace, filesonic, filefactory, netload, crack, serial, keygen, requirements or whatever-related comments here. Don't be rude (permban), use only English, don't go offtopic and read FAQ before asking a question. Owners of this website aren't responsible for content of comments.
Pages: « 1 2 3 [4] 5 6 7 8 » Show All
  1. Chade
    October 25th, 2008 | 05:09

    luckily i started to read this thread and found the crack to 2.12.0 if the crack really works i’ll bow to you :)

  2. EarlZ
    October 25th, 2008 | 05:58

    @Adhome, your 2.12.0 crack works 100% and perfectly!

    @Chade, you have some bowing to do man!

    currently im level 33 and started my playing my character with adhome’s crack with 2.11.0

  3. horus3
    October 25th, 2008 | 06:14

    @EarlZ

    Ok simple question. With the paull.dll do i leav it in and hit start sacred 2 on the little window that comes up? Or do i pull it out and let it run without it. Thats all =D

  4. EarlZ
    October 25th, 2008 | 06:55

    leave the paul.dll alone, the crack package that adhome uploads has the original paul.dll also.

  5. horus3
    October 25th, 2008 | 07:05

    @EarlZ cool thanks man. Ill leave it in, and just hit Start Sacred on the registration box thingy =D

  6. AD
    October 25th, 2008 | 07:49

    @Phreak: which forum?

  7. Kenjay
    October 25th, 2008 | 08:09

    Hi everyone

    my question is similar to horus3 question.
    When i start sacred with the loader (sacred2.exe), a little window appears. I can choose between start game and continue. If i click continue, then i have to enter a serial. Clicking on start game lets me play the game. What do I habe to click?
    I’m playing v2.12 with adhome’s crack.

  8. horus3
    October 25th, 2008 | 08:19

    Ok the game no longer dumps me after 3 mins BUT it has crashed 4 times so far all in the same area =( it just stopps responding =/

    Any ideas
    Running a 8800GTS and Vista 32bit

  9. TheDreamWalker
    October 25th, 2008 | 08:35

    @ Icko
    Thank you very much! ;]

    and thanks AdHome!
    Yay, no more lags :)

  10. Rikrak
    October 25th, 2008 | 09:28

    Hello, I’ve had a problem since the past few patches, i use the exe crack etc… i cant click on the main menu. I’ve re-installed it many times…just wondering why is it doing this?

  11. Phreak
    October 25th, 2008 | 09:42

    @328 AD
    board.gulli.com, it’s a german board

    @329 Kenjay
    click on “start game”, and when you can’t click on start game use the “deletesecurom.exe” thats in the package from adhome to start the game again (you have to to it once a day)

  12. Rheik
    October 25th, 2008 | 10:17

    it seems you really only need to run deletesecurom after you exit the game, and it works fine.

  13. rapid
    October 25th, 2008 | 10:20

    Thanks athome!! I bow to u too :-)
    Had same problem with game kicking me out after trying to load but I just disconnected from the internet, same firewall problem. Anyway it work now.

  14. AD
    October 25th, 2008 | 10:29

    Thanks Phreak.

    It still does not work in vista 64, right?

  15. adhome
    October 25th, 2008 | 10:41

    Vista64 was allways working with my last information

    Only XP64 not.

  16. EarlZ
    October 25th, 2008 | 10:55

    @ XP64 users, i dont think there will be a fix for XP64, its like making something specifically for Windows ME

  17. Fra
    October 25th, 2008 | 11:09

    Well adhome said he’s working on a x64 fix… so untill I hear an update from him I keep my fingers crossed.

  18. tindaar
    October 25th, 2008 | 15:16

    just tried the latest 2.12 crack and can confirm that it doesnt seem to work on vista x64(the other cracks did. get the “an error has ocurred while trying to load the target program” message. assuming its just the loder that isnt working under x64?

  19. EarlZ
    October 25th, 2008 | 15:44

    @tindaar

    Unblock sacred2.exe from your firewall.. dunno why this is happend..

    @Adhome, mind telling us what this error is about if we block sacred2.exe ( your loader ) from the firewall

  20. tindaar
    October 25th, 2008 | 16:18

    @EarlZ

    Didnt make any difference, still same error

  21. tindaar
    October 25th, 2008 | 16:29

    nevermind, deleted all entrys in the firewall and now the game started up just fine :D
    thx

  22. Yggra
    October 25th, 2008 | 17:31

    I have an problem with the latest patch.

    I dowloaded the 2.12 crack and now i am getting a error message after like 15min playing.

    I am jusing windows xp pro servis pack 3.

    Does any one have an ide on what i shall do get the game to work for longer then 15 min.

    Sorry for my bad eng.

  23. donkeychops
    October 25th, 2008 | 18:18

    All games work fine (as well as their cracks) on xp64. This one will be no different once it is properly cracked. Right now I don’t think the scene cares about this title until it’s released in the US around Nov. 11th. Once it is, then you will see a proper crack, just like all the other games with securom DRM and such. A simple cracked .exe, one file, that works for all OS’s. By that time I will have bought the game so it won’t matter to me, except for that I’d like to see a removal tool for securom once I unistall. The crack will take care of that since the normal ways don’t get the job done.

  24. horus3
    October 25th, 2008 | 19:41

    Hey has anyone noticed that this release didn;t come with the PhysX engne install like the retail does? wondering if thats causeing some issues.

  25. DDR
    October 25th, 2008 | 19:55

    I applied the crack for the latest version, and it fixed the problem with my level 13 character (quit to menu after a minute, 1 xp per monster kill). However, I’m level 19 now, and when I try to do a quest, or click on something (merchant, quest giver, portal), a message appears saying the trial version has expired (and the character says it too, “admit it, this is a dark copy!” – rather funny, really. Not.) and nothing happens. I can’t continue. Is there any fix for this yet?

  26. adhome
    October 25th, 2008 | 20:00

    LvL13 and 1XP thing is not a spacial fix from my Crack.
    You are not using my Crack proparly!
    Make sure, to start Sacred.exe and NOT sacred_.exe
    No errormessage at startup is important.

  27. Huskie
    October 25th, 2008 | 20:05

    Damn, what the hell is wrong with my game? Everyone says this crack by adhome for 2.12 crack works, yet to me it’s only made the game impossible even to run.

    So, from what I understand when you try to run the 6kb sacred2.exe after unpacking all the files from the uploaded .rar and after running deletesecurom.exe it’s supposed to enter the game normally, without prompting for activation. My OS is a Windows XP w/ SP3, I turned the firewall off, disconnected from the internet and added every single .exe in my sacred2 folder to the exeption list just to be sure. I also patched the game through official downloaded .exes from the net, not from the autoupdater application. What’s happening to me is the following:

    I click on the 6kb loader, it takes a big while until I’m prompted for whether I want to activate the game or play on trial, then I click on play the game, and again it takes a huge while for my screen to turn black, then another huge while for the screen with the logo and green writings to appear. When it gets to the line of connecting to local server, the letter all sorta fuzz up for a moment, then the game hangs. When I’m disconnected from the internet the game just CTD’s saying something about failing to run sgs2.exe, and when I’m connected it just stays frozen on that frame and doesn’t make any progress…

    My game ran perfectly well before on 2.10.1 patch with iApula crack, except for the skilling thing past level 26.

    Someone on this page said that re-patching manually then re-applying the crack worked for him, but when I try to re-patch it says it cannot determine what version my game is (due to the cracked loader, I reckon)….

    So what on bloody earth is going wrong here?

    Btw, I’m pissed at this whole SecuRom/firewall thing, not adhome. I’m very grateful for the crack and compliment him for managing to make a working crack that circumvents all that BS security that’s been put in this game (unfortunately it just doesn’t seem to be working for me… ¬¬).

  28. DDR
    October 25th, 2008 | 20:12

    adhome:
    Oh, that was it. I was using sacred_.exe – it works now.

    Also, excuse my admittedly silly question, but are you saying your crack doesn’t fix the lvl 13 crash to menu and 1xp thing? The problem only disappeared after applying your crack…

  29. Rheik
    October 25th, 2008 | 20:44

    dunno huskie, all i did was unpack the rar into the sacred2 system folder. also backing up the original 3 files it overwrites. then run sacred2.exe it asks you to activate full features and just hit start game. didnt have to messs with firewall or anything. network it s still connected.

  30. DOH !
    October 25th, 2008 | 20:52

    Anyone got the 3 critical files it overwrites and can upload them onto RS ? I forgot to back them up and now need to upgrade it !

    Anyone able to help ?

    Cheers

  31. adhome
    October 25th, 2008 | 21:09

    @DOH !: Try to rename the sacred2_.exe to sacred2.exe
    Perhaps Pathcer will look for this file to be original

    The s2logic.dll must not be pacthed, becaouse it will be overwritten by my crack.

  32. donkeychops
    October 25th, 2008 | 21:17

    No worries adhome, you tried your best. I’m sure it’s not easy, believe me, I looked around for about 3 days to see if there was some kind of known way to manually delete the securom license files from x64 with no luck, they are there to stay it seems…for now.

  33. Huskie
    October 25th, 2008 | 21:23

    Alright, thanks for the help everyone. Guess I’ll just have to try adhome’s crack for version 2.10.1, then… A shame, really, there are so many nice fixes on that 2.12 patch… :(

  34. EarlZ
    October 25th, 2008 | 22:12

    @Huskie, Adhome’s crack is 100% working on my end, all i did was use his files and run his sacred2.exe ( loader ) and allowed sacred2 on my firewall so that his loader wont fail… also using 2.12.00

  35. EarlZ
    October 26th, 2008 | 01:46

    @Adhome, mind looking at this error.. this started popping up at version 2.12.00

    Problem Event Name: APPCRASH
    Application Name: sacred2_.EXE
    Application Version: 2.12.0.0
    Application Timestamp: 490050f6
    Fault Module Name: sacred2_.EXE
    Fault Module Version: 2.12.0.0
    Fault Module Timestamp: 490050f6
    Exception Code: c000001d
    Exception Offset: 00095e21
    OS Version: 6.0.6001.2.1.0.256.1
    Locale ID: 1033
    Additional Information 1: 0866
    Additional Information 2: 1c8ddebe4ea7b16de4744a8bdbea408a
    Additional Information 3: 2140
    Additional Information 4: c0ab74b43dc191a03353e51f582db75f

    If i get this error i can start the game normally with out the your loader, i have to either reboot or relog to my user account to be able to play again, this happens usually after exiting the game about 4-5 times.

  36. EarlZ
    October 26th, 2008 | 07:34

    btw adhome, is it possible to incorporate the deletesecure rom and your loader into 1 file so i dont have to keep on doing the routine clicking ?

  37. adhome
    October 26th, 2008 | 09:26

    @ EarlZ: This error comes, if my loader can only Patch 1Byte.
    Perhaps the loader patched to early.
    Try to kill explorer with Taskmanger to get game working again. Look for game still running in taskmanger.

  38. AD
    October 26th, 2008 | 11:19

    I can’t make it work.
    Vista 64.

    I disable the firewall, and start it with sacred2.exe

    The screen goes white (not responding) then after a while, it shows the screen with the “launching autoexec.txt”, screen blurs a little bit, then nothing.

  39. EarlZ
    October 26th, 2008 | 12:53

    @adhome

    I see, maybe you can fix that very small issue ?

  40. polep
    October 26th, 2008 | 14:53

    Hey can anyone write from begining to the end how to play further than the 25lvl and maybe how to patch exacly to the 2.12 version with links to the patches and cracks if works i can host it on my serv..

    Whatever im runing 2 pc’s Home one with XP media center and there game crushs after 25 lvl and have no idea how to repair it and second pc with vista 64 but 2.10.1 and lvl 18 so i am worried what will haappen when i will be at 25 ???

    would be nice if some one got some info :P

    adhome maybe You ? :P

  41. EarlZ
    October 26th, 2008 | 15:16

    @polep

    Lets start fresh, uninstall your sacred2 remove all config and temp files ( ill leave that upto you on how do to that )

    Install Sacred2,Update to 2.10 > 2.11 > 2.12 after the updates download the crack that adhome posted, run his sacred2.exe ( loader ) play dont forget to run delete securerom once in a while.

  42. polep
    October 26th, 2008 | 15:29

    AND AFTER 25LVL EVERYTHING IS OK ?

  43. Yggra
    October 26th, 2008 | 15:36

    Is there any one else that have a problem with the Sacred2.exe.

    My windows is termenating the game after like 15min.

    I have reinstalled sacred 2 but it dident help.

    Must say that the crack is imba its just that it gets termenated by my windows all the time. I have tried all the tips on this page but it dont work.

    The crack for 2.10 worked like an clock.

  44. Mr.Floppy
    October 26th, 2008 | 16:39

    Is there any crack for X64 systems?

  45. PiPPo
    October 26th, 2008 | 17:42

    for adhome: can you please share your .PLG loader data? i would like to see the values since this works only with english sacred.exe – thanks so much ;)

  46. Kappa
    October 26th, 2008 | 18:06

    I have tried to play in Multiplayer LAN, but only 1 player can have access to the server.

    I open the s2gs.exe, I see in multiplayer Room the server, but when 1 player enter in the game, the others can’t access.

    It’s normal?

    All PC with Vista 32 an 2.12v. In singlemode work fine.

    Thank you Adhome for your hard work …

  47. vinny
    October 26th, 2008 | 19:12

    Can anyone/someone please post whether or not this works after lev 26? is there any where else in the game where copy protection messes with the gameplay? I appreciate your answers and ll you’re help peeps…ty in advance.

  48. EarlZ
    October 26th, 2008 | 20:18

    @polep

    Yes, I used adhome’s crack since i made a new character.

    @Yggra

    I guess your stuck with 2.10 also several people had issues above 2.10 i guess your one of the many.

    @Mr.Floppy

    XP32 and Vista32/64 as of now.

    @XP64 users,

    Dump the OS. vista 64 is far better,faster and more stable than XP64 will ever be.

  49. adhome
    October 26th, 2008 | 21:02

    @PiPPo:

    This are the offsets for 2.12.0 only:
    495E21: 9090
    495EBF: B001
    496A18: B80100000090909090909090

    For s2logic.dll you can get offsets by your selves (;

  50. rapid
    October 26th, 2008 | 21:31

    I’m using adhome’s crack for 2.12 and works great from the start. Started using it at lvl 26 and now I’m lvl 29, no problems. I have XP SP3. Once game started kicking me out to the main menu after 15 min of playing but after I disconnected from the net and disabled my firewall it worked fine. No skill points bug, game crashes from time to time but that is problem with the game!

  51. vinny
    October 26th, 2008 | 21:43

    Ty very much rapid :) I too can comfirm that dissconnecting from the net before play does truly help the situation. I was also wondering something else….I’m not using version 2.12 so what should i do to update to version 2.12 so i can get it to work properly…The answer is prolly as simple as updating and cracking but i just wanted to make sure so i’ll know if i have to make new char’s or something. Ty you very much for all your timely responses. :) .

  52. vinny
    October 26th, 2008 | 21:46

    Also i wanted to add for those people who are getting booted back to the menu screen that it happens to me as well but when i enter the game for a second time i get to issues with getting booted back to main screen. I use deletesecurerom after each time of play and i also make backup save files before each use of deletesucurerom. Hope that helps a bit. Currently i am using the iAPULA crack.

  53. vinny
    October 26th, 2008 | 21:50

    EDIT:

    *second time i get “NO” issues with getting booted back to main screen.*

  54. adhome
    October 26th, 2008 | 22:29

    |Currently i am using the iAPULA crack|

    And you are wondering why it is not working?
    Again:
    All issues wih kick back to Menue and 1xp and messages are related to wrong using crack.
    I get lots of mails and all come finaly to the result of wrong the crack.
    They delete paul.dll or start game by sacred_.exe and not sacred.exe
    Again: Start game with 6kb sacred.exe. Do not delete paul.dll

  55. vinny
    October 26th, 2008 | 22:56

    adhome
    actually i have no problems at all right now but i have not reached lev 13. Only prob i encountered was getting booted back to menu once….and i didn’t replace paul.dll with it. So i was just curious…should i just reinstall and update to latest version and use your crack…or can i just update and use or crack without install….ty again for your respones peeps. Keep the community friendly and
    helpful.

  56. e0r
    October 27th, 2008 | 02:29

    i hit 16 last night on a seraphim using adhome crack, so i can confirm that it does work after 13.

    you should be able to just patch your current game, then copy/paste adhomes crack in without a full reinstall.

    another option for XP64 users is to reinstall windows as 32bit. you should be able to reinstall it without losing anything. i know its not the ideal solution, but it would work.

  57. Lazlow
    October 27th, 2008 | 03:12

    Hey guys!
    I am on 2.10 version right now. It worked for a day. Then I think there is a secroum related problem since everytime I log in with my char, I am getting kicked after 1-2 mins.
    Does anyone know working secroum delete file?

    Thanks in advance

  58. Huskie
    October 27th, 2008 | 05:11

    @vinny: iApula crack works almost ok here, as well, for 2.10.1. Like you said get booted back to main menu after loading my game for the first time, but after loading a second time it runs flawlessly. I say “almost ok” because that crack doesn’t get rid of the spending skill and attribute points past level 26 problem.

    I have yet to try adhome’s crack for 2.10.1, but would appreciate if anyone who is using it could tell me if it allows skilling past 26 and if there are any other security related problems past that point.

  59. adhome
    October 27th, 2008 | 08:33

    On Page 3 I posted what my crack does and what not and where are copyprotection bugs and when they come and why.

    2.10.1 I have not released a working crack!

    iApula Crack I dont know. But 100% sure, you will get problems after lvl26->27

    @XP64 support: delete paul.dll will start game, but not 3D World.
    Try:
    - delete paul.dll
    - Start game to main menü
    - Copy back paul.dll
    - Open Char and play in 3D world.

  60. Giulo77
    October 27th, 2008 | 09:11

    Hi, on the house PC I dont have the Internet connection. I’ve tried all cracks but nothing! Now Iive updated the version of Sacred 2 to 2.12 and this evening I’ll try the new crack. I must only copy all files in the system and run DeleteSecuromReg.exe? I have not understood point 3… what wants to say ” loader”?
    Sorry for my english…

  61. EarlZ
    October 27th, 2008 | 10:21

    now at level 50, still getting normal exp from adhome’s loader.

  62. Phreak
    October 27th, 2008 | 12:09

    @Giulo77
    Copy all files from adhome to your install folder and overrite the existing files, then run the game normal with “sacred2.exe” (not with “sacred2_.exe” because that’s the original file and “sacred2.exe” is the loader) when you start the game there pop’s up a window where you can click “Start Game” & “Continue”, there you click on “Start Game”….after 24 Hours, when you try start the Game you can’t click on “Start Game” anymore, and if this happens, close the window and start “delettesecurom.exe” (this will kill the securom registry, you can also call it timehack).Then start the Game again and hit “Start Game”

    hope this helps

  63. Phreak
    October 27th, 2008 | 12:19

    @EarlZ
    Nice to hear ^^
    And now some questions :-D

    1.you can still add skill & attribute points without any problem?

    2.don’t got a problem with a boss at around level 40?.

    3.can still use all buff’s and skills?

    if so, i’m pretty confident that adhome has done a very good job ;-)

    greetz

  64. Mike
    October 27th, 2008 | 13:25

    2.12 crack works like a charm for me however all text disappeared from the menu, from the entire game Oo any idea why? Received the “buy the original game” crap at lvl 19 and got locked out, now reinstalled game, installed 2.12, everything works again but now cant see any text. I think i remember i had the same issue with Sacred 1 at some point but cant recall what was the problem.

    -Mike out

  65. Huskie
    October 27th, 2008 | 15:50

    @adhome: Any chance you could then try to crack 2.10.1, pretty please with a cherry on top? If yes, please tell me what files you’ll need and I’ll be more than happy to upload them. I remember you saying that the original sacred2.exe should be enough, but from that statement it seemed like it would be better if you’d take a look at some other file(s) as well…

  66. adhome
    October 27th, 2008 | 16:44

    Ok, you can try this new crack for 2.10.1
    sacred2.kilu.de/Sacred_2_V1.10.1_DRM_Fix_V0.2.rar

    The problem is/was Attribute Points spending. This must be tested!

    But it’s safer to start new char! Found lots of NetId asks

  67. EarlZ
    October 27th, 2008 | 18:51

    @ Phreak

    1.) Yes, no problem with skill and attributes.

    2.) w/c boss, i started with silver difficulty so level comparison is off.

    3.)yes all my buffs and skills works perfectly.

    @Adhome, Right now im level 50.. just for the heck of it i started the game w/o your loader BUT i did a backup copy of my save game.. leveled up to 51 and i was able to distrubute stats and skills, alhot i got a message about my copy is invalid but i was still getting the regular exp.. does this mean that copy protection only kicks in at level13 and 26->27 ?

  68. adhome
    October 27th, 2008 | 19:00

    @ EarlZ: You get a message, that your version is illegal at LvL50->51 ?
    Please upload the savefile and I will look at it. This is not good and should be fixed.

    @ Huskie: Is 2.10.1 now working?

  69. Huskie
    October 27th, 2008 | 19:35

    @adhome: Yes, the crack you posted seems to be working quite well. I can’t be 100% sure, yet, though, as I’ve only tested it for a few minutes before exiting the game (manually, not because of being kicked out).

    I think the crack isn’t working the way you intended it to, however. When trying to launch the game via the 6kb loader it shows an error message after a while saying that “sacred2_.exe” has caused an error and had to be terminated, yet when launching the game via the “sacred2_.exe” it goes just perfectly, even letting me load my lvl 29 character which i created with the iApula crack and letting me spend both attribute and skill points that I couldn’t before. But like I said haven’t tested it for more than a few minutes, so don’t know for sure yet how stable and reliable the crack is (though my guess is, there won’t be any problems).

    Great work, and thank you very, very much for all your effort, adhome!

  70. EarlZ
    October 27th, 2008 | 19:56

    @Huskie,

    I did a similar thing with my post above, leveled w/o the 6kb loader and it went on ust fine.

    but i wish the errors on the loader would be fixed, since at times there are no errors and sometimes i get like 10 errors in a row.

  71. adhome
    October 27th, 2008 | 20:14

    Open Taskmanager and lokk for still running sacred2.exe oder sacred2_.exe
    Kill them for next try.

    If you start sacred2.exe and window pops up that time is over,and you hit cancel, then the Loader is still running and waiting for the main Programm. It will use 99% CPU time.
    It will look/search for window with “Sacred2 – Falen Angle” name and if its open he will do work and patch.

    I can not do it different, because securom will alarmed and stop patching.

  72. Big Red X
    October 27th, 2008 | 20:39

    I have followed adhome’s instructions and I am getting a big red X in the middle of the screen and no mouse cursor….. so it’s still not working completely.

    For info XP SP3

  73. EarlZ
    October 27th, 2008 | 21:27

    @Adhome, Ive tried that before and i dont see any sacred2 running.

    @397
    That is not part of the crack problem, that is either your hardware or your drivers.. try visiting the official forums for a fix on the big red X

  74. Yggra
    October 27th, 2008 | 21:33

    I solved my problem with the vertion 2.10.1

    I have Os XP sp3

    I removed sacred and uppdated all my drivers in my computer

    then i installed sacred uppdated it and applyed the patch for
    2.10.1.

    Now all works like an clock. Just a tip for you all with XP sp3.

    I hope this can help some of you.

    Adhome’s patch is Realy good. Thx M8.

  75. Yggra
    October 27th, 2008 | 21:35

    I ment vertion 2.12.

    Sorry i was thinking wrong. Sorry again it shall be the 2.12 Latest vertion on the game.

  76. e0r
    October 27th, 2008 | 22:05

    @mike

    i had that problem on my first install, no text on anything.

    my problem was it failed to copy the proper language text and audio files off of the second dvd when it installed.

    i had to reinstall the game, and it worked the second time.

  77. e0r
    October 27th, 2008 | 22:11

    i also remember when i had that problem, i used daemon tools to install the game.

    i had mounted both images at the same time, and it failed to read files off the second dvd, and caused my game to have no text or speech audio.

    when i reinstalled i did not mount both images. i mounted the first DVD and installed, when it asked for the second dvd i unmounted the first dvd, then mounted the second one.

    it went perfectly that way.

  78. Mike
    October 27th, 2008 | 22:41

    @e0r

    Hmm should have known its something like that, thx will try ;P

    -Mike out

  79. Rick
    October 27th, 2008 | 22:53

    Hey, Im a Vista x64 user, tried the crack but its not working when I launch mine im getting the activate window poping up. I can play the game temporarily but thats not being cracked. Where can I get the newer patch that fixes the DRM issue? and is x64 fixed yet? Can someone let me know?

    Thanks!

  80. das
    October 27th, 2008 | 23:43

    there is no x64 WORKING crack yet. pick one:

    1. be patient and wait for a working one
    2. learn 2 crack
    3. change OS

  81. EarlZ
    October 28th, 2008 | 05:12

    @adhome

    “This popup is no problem. I fixed that already with 1 Byte change. ”

    Did you mean the patching error pop up? if so can we have a copy of the updated loader.

  82. adhome1
    October 28th, 2008 | 12:48

    Nono…

    different loader:
    [URL]sacred2.kilu.de/sacred2_%20V2.12.0%20SpecFix.rar[/URL]

    1 Byte and first popup “Play oder buy” will not come.

    But this is cosmetic. You need to crack securom to pass timelimit.

    PS: This loader is from differnt engine. Perhaps working better for you.

  83. EarlZ1
    October 28th, 2008 | 14:18

    @Adhome

    You made that crack ? full tested and working ?

  84. distributor
    October 29th, 2008 | 02:17

    @ adhome

    do you mind if i do one pack with the latest updates and include your crack(giving all the preps to you ofc in the nfo:) ) and start upping it to some private trackers?You will be praised like God :)

  85. horus3
    October 29th, 2008 | 04:58

    Hey earl,
    I saw ya on the fourms (im Taggert there) anywho anyway to get just the elite textures? This copy did not seem to come with them =( (WARG release).

    Thanks =D

    Tag

  86. EarlZ
    October 29th, 2008 | 05:27

    @Taggert, PMed you at the forums.

  87. giulo77
    October 29th, 2008 | 07:56

    Ops, the readme speak about a “loader”… i’ve the italian version and the button to press is “inizia” (I dont know if in english the traduction is “start”) but this is the button to begin the dedmo version, only with this button is possible to play the game.

  88. EarlZ
    October 29th, 2008 | 19:17

    Nov11 is the release date for the US version, buy that time one of the major scene groups should have a crack ready.

  89. masterfaster
    October 29th, 2008 | 19:39

    2 releases are out:

    Sacred.2.Fallen.Angel.WORKING.Updates.And.Crack-iND
    Sacred.2.Fallen.Angel.WORKING.Updates.And.Crack – TorrentLeech

    But don’t bother, they include the Sacred 2 v2.12.0 Crack by adhome (Sacred2_V2.12.0_Crack_V1.0.rar)

    The crack is suppose to work ok for 32bit Windows

  90. EarlZ
    October 29th, 2008 | 19:58

    So they stole adhome’s crack ?

  91. masterfaster
    October 29th, 2008 | 22:40
  92. Rick
    October 29th, 2008 | 23:48

    Well, Ive tried the latest crack with Vista x64 and its not working. I hope a fix comes out soon.

  93. EarlZ
    October 30th, 2008 | 06:12

    @ 419

    Follow the instructions, i got it working and im now level 58

  94. amar
    October 30th, 2008 | 10:53

    @ 419

    use http://sacred2.kilu.de/Sacred2 V2.12.0 Crack V1.0.rar
    works for me in vista64

    the previous ones for 2.12 didn’t work for me too except the first one but is crashed the game occasionally

  95. adhome
    October 30th, 2008 | 11:40

    @amar: Sure? This was the first crack. No previous possible.
    Perhaps you meen:
    http://sacred2.kilu.de/sacred2_%20V2.12.0%20SpecFix.rar

  96. strigoii_mortii
    October 30th, 2008 | 17:34

    Could anyone help me please ?
    I´ve tried to reinstall the game, but it always freeze during setup incialization. I´ve erased registries and installer, but still not working :(
    Thanx
    (First install was ok, but no patch was available)

  97. strigoii_mortii
    October 30th, 2008 | 17:39

    423
    Nevermind, just cloaked the drive and disabled antivirus, no working with no problem

  98. Rick
    October 30th, 2008 | 19:06

    OK guys I seem to have it working now, but a question.

    When I start the game Im getting that pop up window,the one that u use to activate the game. This is trhw window that says you can play but in trial mode. Do I need to be concerened with this window? I jsut dont want to be leveling up and have it dump me out with the level up dump.

    @adhome do you know?

  99. EarlZ
    October 30th, 2008 | 23:06

    @Rick,

    Just click on start game, that activation notice is normal.

    Hopefully when reloaded or some other major group releases a crack that thing will be gone.

  100. amar
    October 31st, 2008 | 11:01

    @422

    nope, this one works for me, the specfix is not working and crashes sacred2 after loading the save or mostly right after start before the green loadingscreen is coming up.

    sadly i get no errormsg only that the .exe was termined or crashed dunno remember the exact msg.(no debug output :( )

    the game is the warg release with the 2.12.0 patch.

    and thanks for your work its great so far.

    my system vista64, nvidia physx on an evga 8800 ultra sc, 4 gb ram, maxtor 10k rpm 150gb hdd

Pages: « 1 2 3 [4] 5 6 7 8 » Show All

Leave a reply